ZyXel LTE7240-M403-EU01V1F

LTE7240-M403,EU region,b1/3/5/7/8/20/38/40/41,WCDMA B1/5/8,GSM B3/8

The Zyxel LTE7240-M403 4G LTE Outdoor Router comes with what the critical feature, “the second WAN”, needs – flexible routing mode with both bridge and router functions, high-gain antenna for better signal and performance as well as robust IP56 outdoor hardware designed for harsh environments.

As mobile devices such as smart phones and tablets consume more wireless broadband, the crowded bandwidths have become a big issue to operators. Mobile broadband is a better solution than fixed-line broadband for its lower investment and faster deployment. However, since fixed lines have been the major broadband infrastructure in most places of the world for a long time, people are already using fixed lines for broadband Internet connection in most cases. Migrating from fixed lines to mobile broadband may need extensive evaluation, however adding mobile broadband as a backup for better performance or stability could be an easier decision.

The Zyxel LTE7240-M403 4G LTE Outdoor Router comes with what the critical feature, “the second WAN”, needs – flexible routing mode with both bridge and router functions, high-gain antenna for better signal and performance as well as robust IP56 outdoor hardware designed for harsh environments. No matter you have a router device or not, the LTE7240-M403 can be easily deployed and integrated into your existing environment. You can set LTE as your main connection or use LTE as a backup when performance of the main connection drops. The LTE7240-M403 is good for any venue like suburban areas, public locations, homes and offices. Enjoy LTE technology with minimum effort with the LTE7240-M403.

Embedded bridge/router mode adapts to all kinds of devices/gateways

For better network integration, Zyxel embeds both bridge and router modes into the LTE7240-M403. While users can take advantage of the built-in routing functions in all typical applications, the bridge mode is designed to work with users’ existing or preferred devices such as high-end Wi-Fi Access Points, Small Business Gateways or Enterprise Gateways. With the two built-in modes, the LTE7240-M403 can be easily integrated with all kinds of devices/gateways.

Built-In multi-band antenna

Zyxel’s LTE7240-M403 4G LTE Outdoor Router provides multi-band embedded antennas of up to 7 dBi that work effectively in outdoor environments. The outdoor-friendly design makes it possible to work in near non-line-of-sight conditions where desirable signal strength was difficult to achieve.

Non-stop connectivity with LTE 2nd WAN for fail-over

Multi-WAN fail-over relieves the risk of network outage caused by dependence on single-WAN technology. Even better, LTE is wireless so you can get the second WAN without an additional cabling plan. As long as the gateway supports “multi-WAN fail-over”, you can just connect the Zyxel LTE7240-M403 to the existing gateway and set LTE as the fail-over WAN.

Software upgrades over-the-air

Through the LTE radio interface, the Zyxel LTE7240-M403 supports TR-069 has full over-the-air configuration and software upgrade capability through events triggered by the operators.

System Specifications

IP Networking

Support IPv4/IPv6 dual stack (NDP IPv6)

DHCP server

ICMP supported

Virtual Private Network (VPN) pass through

Support NAT/NAPT/NAT disabling

Support DMZ

Support port forwarding/triggering

Support ALG

Routing

Support Bridge/Router mode

Support Dynamic DNS for first APN

Static/dynamic route setting for RIP v1/v2

Support Remote Management under Bridge Mode

Address Resolution Protocol

IP Firewall

Firewall can be enabled or disabled via GUI

DoS Attack Prevention

Support SPI

Application-Level Firewall

Filters LAN MAC address

Filters LAN IP address

Filters URLs

Management

Support Local/Remote device management and firmware upgrade via TR-069 and Web GUI

SMS management

APN management

PIN/PUK management

Network selection

Network preference

Operating frequency band selection

CLI/SSH (Local and remote SSH access)

Support UPNP IGD

Support SSH with key access

Support Bandwidth/Quota management

Support Web server API to support APPs

Hardware Specifications

LTE Interface

• Standard compliant: 3GPP UE Category 4
• Supported frequency: Band 1/3/5/7/8/20/38/40/41

FDD LTE peak data rate: 150 Mbps DL within 20 MHz bandwidth 50 Mbps UL within 20 MHz bandwidth

TDD LTE peak data rate: 112 Mbps DL within 20 MHz bandwidth 10 Mbps UL within 20 MHz bandwidth

UMTS/EDGE/GPRS/GSM Air Interface

Standard compliant: WCDMA Rel’99 and Rel’10 DC-HSPA+, GSM/GPRS/EGPRS Rel’99

Supported frequency:

UMTS band 1/5/8

EDGE/GPRS/GSM band 3/8

DC-HSPA+ downlink data rate up to 42 Mbps

HSUPA uplink data rate up to 5.76 Mbps

UMTS data rate up to 384 kbps

EDGE data rate up to 236.8 kbps

GPRS data rate up to 85.6 kbps

LTE/UMTS/GPRS Antennas 2 embedded antennas of up to 7 dBi

Power Specifications

Passive power over Ethernet

Power consumption at jack: -lt; 10W

WiFi AP Features 802.11 n/g/b, 2.4 GHz, N300

Hidden SSID

MAC Address Filtering

For local management purpose only

Hardware Interface

One 10/100/1000 Mbps Ethernet RJ-45 LAN port

LEDs:

Power -amp; signal and quality

Internet status/SMS

WiFi status

LAN status

One 3FF format mini SIM card slot

One WLAN button

One reset to default button

Power Consumption 15V/1A Power over Ethernet (PoE)

Physical Specifications

• Dimensions (WxDxH): 140 x 60 x 200 mm (5.51 x 2.36 x 7.87)
• Weight: 800g (1.76 lb.)

Environmental Specifications

Ingress Protection Rating

IP56 enclosures

Operating Environment

• Temperature: -20°C to 60°C (-4°F to 140°F)
• Humidity: 5% to 95% (Non-condensing)

Storage Environment

• Temperature: -30°C to 70°C (-22°F to 158°F)
• Humidity: 5% to 95% (Non-condensing)

Certification

CE/Safety